The GLTH Series with an included TOYO motor
Closed Loop Stepper Motor Linear Positioners Download native CAD models and request a technical quote for the CPGLTH Series series today. Contact our applicatio
The CPGLTH Series is engineered for high-efficiency factory automation where panel space and commissioning time are critical. By integrating a high-torque closed-loop stepper motor and its dedicated drive directly into the actuator chassis, the CPGLTH eliminates the need for external controller cabinets and complex cable management.
Engineered to adapt to your specific build requirements, the CPGLTH Series is available in two base chassis sizes:
Both models can be configured with custom stroke lengths and various ball screw lead options, allowing you to optimize the precise balance of speed and thrust for your cycle times.
Performance is driven by a highly responsive closed-loop stepper system that constantly monitors position, ensuring absolute accuracy and zero step-loss even under dynamic loads. Paired with a precision-ground ball screw and an integrated bearing guide system, the CPGLTH series delivers remarkably smooth travel and high repeatability for demanding, high-cycle factory processes.
The CPGLTH Series is the versatile workhorse for a wide range of industrial applications:
Built-in closed-loop stepper motor and drive eliminate external cabinets, reducing wiring complexity and saving up to 40% in panel space.
Flat, built-in guide rail design minimizes the overall footprint while maintaining exceptional structural rigidity and load stability for height-restricted builds.
Delivers highly accurate, repeat positioning with zero step-loss, providing a cost-effective alternative to expensive servo systems for standard factory automation.
Engineered for rapid deployment, allowing direct integration into single or multi-axis systems with minimal setup, tuning, or commissioning time.
| Specification | CPGLTH5-L2 | CPGLTH5-L6 | CPGLTH5-L12 | CPGLTH8-L6 | CPGLTH8-L12 | CPGLTH8-L24 |
|---|---|---|---|---|---|---|
| Product Size (W x H mm) | 58 x 40 | 80 x 56 | ||||
| Repeatability (µm) | 5 | |||||
| Maximum Payload (kg) | 25 | 20 | 12 | 30 | 15 | |
| Maximum Thrust (N) | 747 | 249 | 124 | 453 | 226 | 113 |
| Maximum Travel (mm) | 1000 | 1250 | ||||
| Maximum Speed (mm/s) | 100 | 300 | 600 | 300 | 600 | 1200 |
| Maximum Acceleration (G) | 1 | |||||
1 Maximum payload and thrust are specified based on an L10 life rating. To calculate life for your application, please contact us.
| Specification | 50 (mm) |
100 (mm) |
150 (mm) |
200 (mm) |
250 (mm) |
300 (mm) |
350 (mm) |
400 (mm) |
450 (mm) |
500 (mm) |
550 (mm) |
600 (mm) |
650 (mm) |
700 (mm) |
750 (mm) |
800 (mm) |
850 (mm) |
900 (mm) |
950 (mm) |
1000 (mm) |
1050 (mm) |
1100 (mm) |
1150 (mm) |
1200 (mm) |
1250 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CPGLTH5 Weight (kg) | 1.39 | 1.52 | 1.64 | 1.77 | 1.9 | 2.02 | 2.15 | 2.27 | 2.4 | 2.53 | 2.65 | 2.78 | 2.91 | 3.03 | 3.16 | 3.28 | 3.41 | 3.54 | 3.66 | 3.79 | Not Available | ||||
| CPGLTH5-L2 Speed (mm/s) | 100 | 90 | 80 | 70 | 63 | 53 | 50 | 43 | 40 | 36 | Not Available | ||||||||||||||
| CPGLTH5-L6 Speed (mm/s) | 300 | 270 | 240 | 210 | 189 | 159 | 150 | 129 | 120 | 108 | Not Available | ||||||||||||||
| CPGLTH5-L12 Speed (mm/s) | 600 | 540 | 480 | 420 | 378 | 318 | 300 | 258 | 240 | 216 | Not Available | ||||||||||||||
| CPGLTH8 Weight (kg) | 2.73 | 3.03 | 3.32 | 3.62 | 3.91 | 4.21 | 4.51 | 4.8 | 5.1 | 5.4 | 5.69 | 5.99 | 6.28 | 6.58 | 6.88 | 7.17 | 7.47 | 7.77 | 8.06 | 8.36 | 8.66 | 8.95 | 9.25 | 9.54 | 9.84 |
| CPGLTH8-L6 Speed (mm/s) | 300 | 350 | 310 | 270 | 240 | 210 | 190 | 170 | 160 | 140 | 130 | 120 | 110 | 100 | 90 | 36 | |||||||||
| CPGLTH8-L12 Speed (mm/s) | 600 | 700 | 620 | 540 | 480 | 420 | 380 | 340 | 320 | 280 | 260 | 240 | 220 | 200 | 180 | 110 | |||||||||
| CPGLTH8-L24 Speed (mm/s) | 1200 | 1400 | 1240 | 1080 | 960 | 840 | 760 | 680 | 640 | 560 | 520 | 480 | 440 | 400 | 360 | 220 | |||||||||
To ensure the highest level of design accuracy and reduce your engineering lead times, TOYO Robotics Americas provides a comprehensive library of native CAD models. Hosted through our CAD Community Portal, these models are not generic placeholders; they are highly detailed, configurable files designed to drop directly into your assembly.
Select a size to view the specific ordering code configuration:
Contact our application engineers to generate your exact part number or for complex multi-axis configurations.
Request Configuration Support